Below The Hook Lifting Devices

Below The Hook Lifting Devices

Well Engineered has designed and manufactured many ASME B30 compliant lifting devices to handle a wide range of equipment and materials. for a wide range of equipment and materials. We have a lifter for pipes, a lifter for paper rolls, bags of sand, railcar axles, all the way to full-sized aircraft. We can design lightweight lifters from aluminum, corrosion-resistant stainless steel, or more conventional steel.

Conventional Spreader Bars and Lift Beams

If you have an application to lift an item or material that doesn’t have an off-the-shelf solution, we can economically design and manufacture you a custom lifting device. We’ve supplied dozens of these over the years for various applications.

Lightweight Spreader Bars and Lift Beams

Bare Aluminum primary structure with painted steel rigging points. These lifters are generally less than 50 lbs to make them easy to move around by hand, but intended to lift objects up to about 2500 lbs. Contact us if you have a specific application for a lightweight lifting device!

• Cessna L-19 Lift Beam

  Designed to suspend the aircraft from a single point in either tail-up attitude as if it were in flight, or tail-down attitude as if it were taxiing on the ground.

• Spreader Bar for Material Bins

  Designed to allow an open-top crate to be picked up with a single point lift, and also be handled by a single person when not in use.